7
There are various kinds of wire insulation strippers.
Some different types are shown above.
Whichever kind you use be sure that they are suitable
for 26 AWG wire.
Some different types are shown above.
Whichever kind you use be sure that they are suitable
for 26 AWG wire.
1. Rosin Core Solder
(small diameter suitable for electronics use)
2. Pencil Type Soldering Iron (30 watt max.)
3. # 2 Phillips Screw Driver
4. # 0 Phillips Screw Driver
5. 12 mm Open End Wrench
(small diameter suitable for electronics use)
2. Pencil Type Soldering Iron (30 watt max.)
3. # 2 Phillips Screw Driver
4. # 0 Phillips Screw Driver
5. 12 mm Open End Wrench
8
9
10
6a. 3 mm Allen wrench (six sided wrench)
6b. 2.5mm or 3/32 inch Allen wrench (six sided wrench)
7. Wire Strippers suitable for 26 AWG wire
8. Power hand drill or drill press
9. 1/8 inch or 3mm drill bit (available in any hardware store)
10. Vice grips or other suitable locking pliers
6b. 2.5mm or 3/32 inch Allen wrench (six sided wrench)
7. Wire Strippers suitable for 26 AWG wire
8. Power hand drill or drill press
9. 1/8 inch or 3mm drill bit (available in any hardware store)
10. Vice grips or other suitable locking pliers
WHAT TOOLS DO I NEED TO INSTALL A + HS™ KIT ?
TOOLS NEEDED FOR THE + HS1 THROTTLE KIT
Tools as shown above: 1, 2, 3, 4, 5, 6a, 7
Go back to + HS1 Throttle instructions
TOOLS NEEDED FOR THE HS2 & + HS2 MK II JOYSTICK KIT
Tools as shown above: 1, 2, 3, 5, 6b, 7, 8, 9, 10
Go back to + HS2 Joystick instructions
Go back to + HS2 Mk II Joystick instructions
TOOLS NEEDED FOR THE + HS3 MK II JOYSTICK & THROTTLE KIT
Tools as shown above: 1, 2, 3, 4, 5, 6a, 6b, 7, 8, 9, 10
Go back to + HS1 Throttle instructions
Go back to + HS2 Joystick instructions
